ProSoft Technology’s Ethernet /IP™ to Siemens ® Industrial Ethernet communications gateway allows high-speed two-way data transfer between Rockwell Automation ®pac and Siemens ®S7 pac. Two separate Ethernet ports allow each protocol to reside on a separate Ethernet port subnet, allowing you to pass data between the two subnets to change the IP address of each device.
In addition, the gateway includes an embedded EDS add-on profile to simplify integration and shorten debugging time.

 two independent Ethernet port allows each protocol resides in a separate subnet. This allows you to pass data subnets between the two without changing the IP address of each device to the same subnet.
 data priority: multiple I/O connection allows you to set the rpi for state and/or control data.
 include an embedded EDS additional configuration files, allows easy integration and reduce debugging time.
 gateway contains an SD card slot (SD card is optional), is used to store the configuration file. This can be used for disaster recovery.
 security module by module switch configuration (v1.04 and later).
 as many as 10000 16-bit registers can be used for the exchange of large amounts of data.

ProSoft Technology’s EtherNet/IP to Siemens Industrial Ethernet communications gateway allows high-speed two-way data transfer between Rockwell Automation PACs and Siemens S7 PACs. Two separate Ethernet ports allow each protocol to reside on a different subnet, allowing you to pass data between the two subnets without changing the IP address of each device. In addition, the gateway includes an embedded EDS add-on profile that simplifies integration and reduces debugging time.