数字闪频仪

数字闪频仪

参考价: 面议

具体成交价以合同协议为准
2023-02-18 10:53:01
434
产品属性
关闭
辅光精密仪器(上海)有限公司

辅光精密仪器(上海)有限公司

免费会员
收藏

组合推荐相似产品

产品简介

数字闪频仪DT-2349采用微处理器电路设计,测量精度高,数字显示,广泛用于动态检测齿轮,风扇,离心机,水泵,电机等设备转速测量,用于一般工业维护,生产,质量控制,科研实验室应用

详细介绍

数字闪频仪DT-2349采用微处理器电路设计,测量精度高,数字显示,广泛用于动态检测齿轮,风扇,离心机,水泵,电机等设备转速测量,用于一般工业维护,生产,质量控制,科研实验室应用。
数字闪频仪DT-2349特点
*数字合成电路,稳定性高,调节分辨率高,操作方便。
*晶体时基提供高精度测量和快速测量时间。
*高强度氙闪光管。
*宽范围:60至32000 rpm。
*调整分辨率:0.1转(<1000转),1转(≧1000转)。
*高强度光。
*设置按钮:数字调整按钮,x 2键,2键÷,+按钮,按钮,操作方便。
*带插座的氙气闪光管,易于更换管。
*紧凑和重型外壳。
数字闪频仪DT-2349规格
Display 5 digits ( 0 to 99999 ) LCD display.
Flash adjust range 60 to 32,000 RPM/FPM.
RPM : round per minute.
FPM : flash per minute.
Resolution 0.1 RPM :
< 1,000 RPM.
1 RPM :
≧ 1,000 RPM
Function buttons Digital rotate knob,
x 2 button, ÷ 2 button,
+ button, - button,
Accuracy ± (0.05 % + 1d)
* Spec. tested under the environment
RF Field Strength less than 3 V/M & frequency less than the 30 MHz only.
Power Supply 110 Vac ± 10%, 50/60 Hz.
or
220 Vac ± 10%, 50/60 Hz.
or
230 Vac ± 10%, 50/60 Hz.
* A " Voltage rating label " is affixed under the bottom case to show the voltage rating of power supply.
When use the stroboscope, make sure to identify the power supply voltage exactly.

Circuit Microcomputer LSI circuit & crystal control time base.
Digital synthesis circuit for the
signal adjusting.
Signal Stability The signal adjusting circuit is used the digital synthesis circuit, the output signal will existing high stability and
not change.
Power Supply AC( 100V to 240V ) to DC 9V ( 3A )
adapter, incuded.
Build in battery compartment, power can be used the optional DC 1.2 V
Ni-MH recharge battery ( UM-1, D size
) x 4 PCs.
Power
Consumption
DC 2.4 A ( 3600 FPM )
Operating Temp. 0 to 50 ℃ (32 to 122 ℉).
Operating
Humidity
Less than 80% R.H.
Dimension 21 x 12 x 12 cm (8.3 x 4.8 x 4.8 inch).
Weight 1Kg/2.2 LB.
Housing Compact and impact plastic injection
case with plastic mirror type reflector.
Calibration Crystal time base and microprocessor
circuit, don't necessary take any external calibration process.
Accessories Included Operation manual. 1 PC.
AC( 100V to 240V ) to DC 9V adapter
.....................................................1 PC.
Optional Accessory Flash Xenon tube... Model : TBXE-2289
DC 1.2 V Ni-MH recharge batteries,
UM-1/D size ( BAUM-1) x 4 PCs.
DC 1.2 V Ni-MH batteries charger with AC adapter, complete set. Model: BACH-110 ( AC 110V power )
Model: BACH-220 ( AC 230V power )

数字闪频仪DT-2349闪光管规格
Flash tube Xenon lamp.
Flash Duration Approximately 60 to 1,000
microseconds.
Flash color Temp. Xenon white 6,500 K degree.
Flash energy 4 Watts-seconds (joules).
Beam Angle 80 degrees.
Flash tube replacement It is required to change the flash tube
when the instrument start to flash irregularly at speeds > 3600 RPM/FPM.
Operating duty Cycle For prolong life and safety, please adhere to the following operation duty cycle: < 2000 RPM - 2 hours
2001 to 3600 RPM - one hour 3601 to 8000 RPM - 30 minutes
> 8000 RPM - 10 minutes.
* 10 min. cooling off period between cycles.
上一篇:食品接触包装材料阻隔性能检测解决方案
热线电话 在线询价
提示

请选择您要拨打的电话: