1. Main Engine Transmission part: uses the Taiwan AC motor to match the frequency changer as the cutting material transmission, the acceleration deceleration stable fast

2. Central Control Unit: the use of programmable central control, the same axis can be set in a variety of sizes(up to 20 models) one-time automatic conversion cutting, so that unmanned operation automatically completed.

3. Operation Panel section: operating interface using LCD touch screen 10 inches, can be directly set on the screen on a variety of cutting conditions and operating condition,

4. Motor control System: the central control system for PLC programmable controller, the same axis can be set a variety of sizes, the computer in the cutting automatically adjust cutting width.

5. Cutting Positioning System: the use of Japan, Europe Series brａnd servo motor control, high-precision import ball screw size positioning and the use of linear slide bearing knife seat, accurate and smooth positioning action

6. Knife Positioning System: the use of Japanese, European series of brａnd servo motor control into the knife, can be personified to do three-section speed into the knife cutting volume, improve efficiency and get the best quality.

7. Round knife Automatic angle adjustment: Uses the Japanese, the European Series Brａnd Servo motor calculates the round knife angle different material to do different angle change(angle adjustment range +8)when cutting flat When the face is not good, can directly transform the angle of cutting, can reduce the number of knife change, avoid the trouble of manual adjustment angle, greatly improve production efficiency.

8. Quick-change axis device: This machine has two kinds of cutting shafts to choose from, adopt the fast changing axis mode, because of different material needs.

9.(optional)built-in dual-motor automatic sharpening machine, always maintain a sharp edge, easy to operate

10. (optional) installed a large security shield, greatly improve the safety of the operation of the machine.