TEXSTEAM™ Plug Valves旋塞阀

TEXSTEAM™ Plug Valves旋塞阀

参考价: 面议

具体成交价以合同协议为准
2023-02-24 10:59:59
239
产品属性
关闭
上海美盛自动化设备有限公司

上海美盛自动化设备有限公司

免费会员
收藏

组合推荐相似产品

产品简介

TEXSTEAM™ Plug Valves旋塞阀TEXSTEAM™ Plug Valves旋塞阀由美盛科技中国有限公司供应TEXSTEAM 旋塞阀在苛刻的使用条件，如 H2S、 CO2 和磨料或严重的服务应用程序中有悠久的可靠性。TEXSTEAM 阀门都被针对高耐腐蚀性、 泡沫紧密封、 高耐磨、 耐冲击性高。

详细介绍

TEXSTEAM™ Plug Valves旋塞阀
TEXSTEAM™ Plug Valves旋塞阀由美盛科技中国有限公司供应
TEXSTEAM 旋塞阀在苛刻的使用条件，如 H2S、 CO2 和磨料或严重的服务应用程序中有悠久的可靠性。TEXSTEAM 阀门都被针对高耐腐蚀性、 泡沫紧密封、 高耐磨、 耐冲击性高。


TEXSTEAM™ Plug Valves旋塞阀
TEXSTEAM™ Plug Valves旋塞阀由美盛科技中国有限公司供应
TEXSTEAM 旋塞阀在苛刻的使用条件，如 H2S、 CO2 和磨料或严重的服务应用程序中有悠久的可靠性。TEXSTEAM 阀门都被针对高耐腐蚀性、 泡沫紧密封、 高耐磨、 耐冲击性高。























TEXSTEAM D Series Plug Valve
















If your oilfield has tough service conditions - H2S, CO2, entrained sand, high flow conditions - you need the TEXSTEAM™ D Series Plug Valve.

Ten good reasons to use the Texsteam D Series Plug Valve

  • D Series block valves are top entry, infield/inline repairable - saves you substantial repair time and money.
  • Choice of molded PC Buna-N or FKM seats.
  • Bubble tight shut-off - zero leakage.
  • Soft, resilient DuraSeatTM won't pit or scratch like Teflon or Nylon.
  • Meets NACE MR0175 (2002) standard. Built and tested to ASME b16.34.
  • Large, rugged stem with secure locking device to prevent tampering.
  • Quarter turn with internal stops.
  • Time-tested design has been working hard for years in oilfields worldwide.
  • Every D Series valve is backed by the respected Cameron name.

The Secret's in the Seats

The secret to our TEXSTEAM D Series block valves is in the seats -soft, PC Buna-N* injection molded seats that won't scratch or leak like Teflon or Nylon - even under tough service conditions.


Valves - TEXSTEAM Super G Lubricated-Non Lubricated Single Body/Dual Plug




















TEXSTEAM® Super G Lubricated Plug Valve Design Standards

Whenever applicable Super G Valves conform to the latest edition of the following standards specification as to pressure ratings, dimensions and construction:

  • ASME - American National Standards Institute
  • B1.20.1 - Pipe Threads, General Purpose
  • B16.5 - Pipe Flanges and Flange Fittings
  • B16.10 - Face-to-Face and End -to-End Dimension of Valves
  • B16.25 - Butt Welding Ends
  • B16.34 - Valves-Flanged, Threaded and Welding End
  • API - Americn Petroleum Institute
  • 6D - Specification for Pipeline Valves-Monogram Available
  • 6FA - Fire Test for Valves
  • MSS - Manufacture's Standardization Society of the Valve and Fittings Industry
  • SP-6 - Standard Finishes for Contact Faces of Pipe Flanges and Connecting End Flanges of Valves and Fittings
  • SP-25 - Standard Marking System for Valves, Fittings, Flanges and Unions
  • SP-55 - Quality Standards for Steel Castings for Valves, Flanges, Fittings and other Piping Components (Visual Methods)
  • Nace - National Association of Corrosion Engineers
  • MR0175 (2002) - Sulfide Stress Cracking Resistant Metallic Materials for Oil Field Equipment

上一篇：旋塞阀工作原理与旋塞阀主要分类 下一篇：不锈钢三通球阀特点及使用方法概述
提示

请选择您要拨打的电话：