印刷部功能：

1、印刷辊采用无缝钢管，表面研磨，镀硬铬，平衡校正，运转平稳。

2、快速换版装置，装卸印版时，脚踏开关电动控制版辊的正反向转。

3、送纸辊，压印辊，胶辊，网纹辊间隙调整均采用自锁结构。

4、印刷辊相位调整均采用PLC以及电动数字输入式360度调整，停机及运转时均可调整。

5、印刷辊横向调整采用PLC及电动数字式调整，调整范围±10mm。

6、印刷相位固定装置，气动式刹车机构，当单元分离调整或清洗时，刹车机构限制齿轮转动，保持原有齿轮位置固定点。

7、网纹辊采用配合送纸系统气压式升降装置（送纸时网纹辊按单元顺序自动落下，停止送纸时按单元顺序自动抬起。)

8、气动隔膜泵上墨，自动循环，加水清洗。

9、擦板记忆功能，清洗印版后可回到原印刷位置。

Function of printing Department:

1.The printing roller adopt without gap roller, surface is treated by lapping finish, after balance correct and hard chrome plating, smooth in operation.

2.Quickly change printing plate device, foot switch for electric control the printing roller’s clockwise and anticlockwise running.

3.The feed roller, press roller, rubber roller and anilox roller space adjustment all adopt self-locking structure.

4.The phase of the printing roller adopt PLC and electric 360°adjust, accord the error to input the sdjust data, can be adjusted while the machine running or stop.

5.The horizontal direction moving of the printing roller adopt PLC and electric adjustment, accord the error to input the adjust data. the adjust scope is ±10mm.

6.The phase fix device adopt cylinder brake, when the unit is opened and washing, the cylinder brake device will brake all the units rolling running and keep the original location of the gears.

7.The automatic Pneumatic control Up and down device of the anilox

roller is synchronous with the cardboard feeding system.(when the cardboard is fed, the anilox roller of each printing unit will automatic orderly go down. when stop feeding, the anilox roller will automatic orderly go up.)

8.Pneumatic membrane pump inking, automatic circle, water washing.

9.With“clean printing plate memory”function, after washing the

printing plate, the printing roller will running back to the original printing position.