1．整机采用计算机控制，整机同时安装两组瓦楞辊，实现整体多楞型快速更换无需移出更换，实现更高的生产效率，减轻操作者的劳动强度，换辊时间只需５分钟。
2．整机采用全液控技术，保证瓦楞高速定型和良好粘合。
3．瓦楞辊采用齿嵌离合器独立传动无需锁紧机构。
4．采用直驱式三点传动，生产车速更高。
5．该机适合配中、高速瓦楞纸板生产线。
6．采用高压离心风机，带有消声器装置，噪音低。
7．瓦楞辊直径Φ310mm、Φ320mm、Φ360mm、Φ430mm，４6０mm特殊合金钢制造，采用热处理工艺精密磨削。表面镀硬铬处理或喷涂碳化钨处理。
8．各导纸轴、预热缸、加*工作表面磨削加工并镀硬铬处理。
9．整机润滑采用高温油脂润滑形式，集中润滑。
10．采用红外线断纸传感器，实现断纸自动保护；断纸时压力辊退出，浆盘退出.
11．上浆量大小的控制分为电动控制和自动控制。
A、根据生产线的车速通过电机达到所需的控浆量。
B、自动时可根据车速的变化由编码器和PLC自动完成；并有人机界面数值显示，以保证瓦楞机在变速运转时所需要的上浆量，确保高质量的单面瓦楞纸的稳定性。
12. 采用高刚性的同一底座，传动与压制瓦楞一体化；独立驱动箱，实现PLC与变频器的通讯，控制瓦楞机的加、减速达到节约电能并预留生产管理系统通讯接口。
13. 配置喷雾装置，可任意调节原纸的湿度。
技术参数：
1．      zui高机械速度：180 M/min ~300M/min。
2．      有效宽幅：1400mm~2800mm。
3．      楞型：A，B，C，E，F，BC。
Vacuum Single Facer---The perfect embodiment of European Automatic Technology

Characteristics:

1．Computer control, can install 2 group of corrugated roller at the same time. No need to move to exchange the corrugated roller so it can reduce the operator’s working intensity and increase production efficiency. Time of exchange: 5 minutes.
2．Adopt fully hydraulic control to ensure the well form of corrugated paper.
3．Corrugator roller is connected by gear clutch, independent drive, no need lock device.
4．3 points direct drive, higher speed.
5．Applied to mid and high speed production line.
6．High pressure fan structure with silencer is used to reduce noise.
7．The diameter of corrugating roll is Φ310mm,Φ320mm,Φ360mm,Φ430mm,Φ460mm.The corrugating roll in made of special alloy steel, induction hardened. The roll is polished with heat treatment. Coated with chrome or carbon tungsten.
8．The working surface of each paper-guiding roll, pre-heater and pressure roll is polished and coated with chrome.
9．Lubrication by high temperature grease.
10．Infrared detector assures auto paper-breaking protection. When paper is broken, the press roll and the glue trough will withdraw.
11．Thickness of glue is controlled by the clearance between glue roller and doctor roller, by electyomotion or Automatic.
A、Electromotion: Press the button that controls motor to adjust the clearance, to ensure paste enough glue.
B、Auto-controlling: The encoder and PLC auto-controls according the change of speed. And with inter-face.
12. High rigidity one basement structure, drive with corrugating in mutual ;Independent drive box ,Universal joints help to increase stability. Might be communicate with PLC and transducer, control Accelerate or Decelerate Speed; save poner , reserve I/O of computer management system.
13. Might be equipped sprayer, adjustable base paper humidity.
Technical Parameters：
1．Max. speed：180 M/min ~300M/min。
2．Valid Width：1400mm~2800mm。