您现在的位置:达科特进口阀门 - 产品展示 -进口电磁阀
|
|
| 进口燃气紧急切断电磁阀 | 型号:LZT-1123-54-168 | 口径: DN1-DN300 | 压力: 0.6Mpa-1.6Mpa | 材质:304 | | | 进口零压差电磁阀 | 型号:LIT | 口径: DN1-DN300 | 压力: 0.6Mpa-160Mpa | 材质:304 | | | 进口高粘度电磁阀 | 型号:LIT | 口径: DN1-DN300 | 压力: 0.6Mpa-160Mpa | 材质:304 | | | 进口高压高粘度电磁阀 | 型号:LIT | 口径: DN1-DN300 | 压力: 0.6Mpa-160Mpa | 材质:304 | | | 进口高压电磁阀 | 型号:LIT | 口径: DN1-DN300 | 压力: 0.6Mpa-160Mpa | 材质:304 | | | 进口先导式高压电磁阀 | 型号:LIT | 口径: DN1-DN300 | 压力: 0.6Mpa-160Mpa | 材质:304 | | | 进口带信号反馈电磁阀 | 型号:LIT | 口径: DN1-DN300 | 压力: 0.6Mpa-160Mpa | 材质:304 | | | 进口自保持式电磁阀 | 型号:LIT | 口径: DN1-DN300 | 压力: 0.6Mpa-160Mpa | 材质:304 | | | 进口双控电磁阀 | 型号:LIT | 口径: DN1-DN300 | 压力: 0.6Mpa-160Mpa | 材质:304 | | | 进口聚四氟电磁阀 | 型号:LIT | 口径: DN1-DN300 | 压力: 0.6Mpa-160Mpa | 材质:304 | | | | |
进口先导式电磁阀
德国LIT进口先导式电磁阀有几点特点(1)动作快,功率小,外形轻巧。电磁阀响应时间可以短至几个毫秒,即使是先导式电磁阀也可以控制在几十毫秒内。由于自成回路,比之其它自控阀反应更灵敏。设计得当的电磁阀线圈功率消耗很低,属节能产品;还可做到只需触发动作,自动保持阀位,平时一点也不耗电。(2)调节精度受限,适用介质受限。电磁阀通常只有开关两种状态,阀芯只能处于两个极限位置,不能连续调节,(德国力特试图突破,但还都处于试验试用阶段)所以调节精度还受到一定限制。电磁阀对介质洁净度有较高要求,含颗粒状的介质不能适用,如属杂质须先滤去。另外,粘稠状介质不能适用,而且,特定的产品适用的介质粘度范围相对较窄。(3)型号多样,用途广泛。电磁阀虽有先天不足,优点仍十分突出,所以就设计成多种多样的产品,满足各种不同的需求,用途极为广泛。电磁阀技术的进步也都是围绕着如何克服先天不足,如何更好地发挥固有优势而展开。
Germany LIT imports pilot solenoid valve There are several characteristics of (1) the action is fast and small power, lightweight form factor. Solenoid valve response time can be as short as a few milliseconds, even if it is a pilot-type solenoid valve can also be controlled to within tens of milliseconds. Self-loops, other than the automatic control valve response is more sensitive. Properly designed solenoid valve coil power consumption is very low, an energy-saving products; trigger actions can also be done simply, and automatically maintain valve position, usually is not consumable. (2) to adjust the accuracy is limited, restricted Applicable medium. The solenoid valve is usually only switch the two states, the spool only at the two extreme positions, can not be adjusted continuously, (German special forces tried to break through, but also in the experimental trial stage) regulation accuracy is also subject to certain restrictions. Solenoid valve with higher requirements for media cleanliness, containing granular media can not be applied, the case must first filter out impurities. In addition, the viscous medium is not applicable, and particular product is suitable for medium viscosity range is relatively narrow. (3) Model diverse, wide range of uses. Although the solenoid valve deficiencies, the advantages still very prominent, so a wide variety of products designed to meet the various needs, extremely versatile. Solenoid valve technology advances are also around how to overcome the inherent weaknesses, and how to better play to the inherent advantages and expand.
先导式电磁阀参数:
Pilot solenoid valve parameters:
原理结构:分步两次直动导向活塞式 The schematic structure: a step-by-step two direct-acting guide piston
工作环境温度:-20- 50℃、-40- 80℃ Operating ambient temperature: -20 - 50 ° C, -40 - 80 ° C
线圈工作温度:< 50℃、< 85℃ Coil Operating Temperature: < 50 ℃, < 85 ℃
控制方式:常闭、常开 Control mode: normally closed, normally open
标准电压:AC(380、240、220、24)V、DC(110、24)V International standard voltage: AC (380,240,220,24) V, DC (110,24) V
流通流体介质:油、水、气等 The circulation fluid medium: oil, water, gas, etc.
流通流体温度:<-40℃、<-20℃、< 60℃、< 120℃、< 200℃、< 240℃、< 300℃ Circulating fluid temperature: -40 ° C <-20 ° C < 60 ° C, < 120 ° C, < 200 ° C. < 240 ° C, < 300 ℃
流通流体压力:50bar——1600bar The circulation fluid pressure: 50bar - 1600bar
阀体材质:不锈钢(304、316、316L)Body material: stainless steel (304,316,316 L)
阀体连接方式:凹凸法兰式、螺纹(内螺纹、外螺纹) Valve body connection: bump flanged, threaded (internal thread, external thread)
线圈连接方式:铁罩三芯双护套电缆(引线式、封闭式)Coil connection: iron cover three core double sheathed cable (lead, closed)
密封材质性能:耐温、耐压、耐磨、防腐 Sealing material properties: temperature, pressure, wear-resistant, anti-corrosion
泄漏量:零 Leakage: Nil
密封结构:圆弧锥线与锥面密封 Seal structure: the arc cone line with cone seal
性能特点:通用性广、灵敏性高、严密性强、寿命性长 Performance characteristics: wide versatility, high sensitivity, rigor sex life