请输入产品关键字:
按需求-速冷速热模温机
【产品简介】
【详细说明】
优点
1:可*清除产品表面夹水纹,熔接痕,银丝纹。
2:可以解决塑料产品表面缩水问题。
3:提高产品表面光洁度,使高光产品表面光洁度可达到镜面效果。
4:光产品不需要喷油加工,响应环保,提高成品率20-30%。
5:在速冷速热的情况下,使成型周期大大缩短。
特点
1:三菱触摸式电脑控制,全中文界面,操作简单。
2:全闭环系统控制输入输出温度的检测,以模具实际温度反馈PLC,数彩图变化显示,确保输出准确稳定。
3:高温蒸汽,冷水,空气温度及压力六项报警,用时间和动作与注塑机信号互锁。
4:单变路模具温度检测(可选),输入输出管道采用不朽钢管,多组输入输出接口。
Advantages
1:Able to remove the surface of the product folder waterlines,weld,silver pattern;
2:Can solve the problem of surface shrinkage of plastic products;
3:Improve product surface finish,the product of the high-gloss surface finish can be a mirror;
4:High light product does not require injection processing in response to environmental protection,increase yield by 20-30%;
5:Speed cooling rate hot greatly shorten the molding cycle;
Characteristics
1:Mitsubishi touch computer-controlled,full Chinese interface,simple operation;
2:Detection of the closed loop system control input and output temperature,mold temperature feedback the PLC,the number of color pictures change display to ensure accurate and stable output;
3:High-temperature steam,cold water,air temperature and pressure,six alarm,time and action with the signal of the injection molding machine interlock;
4:Univariate Road,mold temperature detection(optional),input and output pipeline immortal steel pipe,multiple sets of input and output interfaces;