产品介绍 Product introduction

硅橡胶 silicon rubber

硅橡胶是非石油产品，不依赖日益紧缺的石油资源，使得硅橡胶制品成为同类塑胶制品的代替品已经是大势所趋，硅橡胶耐低温性能良好，一般在-55℃下仍能工作。硅橡胶的耐热性能也很突出，在180℃下可长期工作，稍高于200℃也能承受数周或更长时间仍有弹性，瞬时可耐300℃以上的高温。硅橡胶具有生理惰性，硅胶无毒，无味，无臭，与人体组织不粘连，具有抗凝血作用，对肌体组织的反应性非常少。特别适合作为材料，同时硅橡胶制品可以应用到有很多塑胶制品不能做到的用途领域，如婴儿奶嘴等，应用前景非常广阔。硅胶产品全部能通过美国FDA认证，SGS认证和欧洲LFGB认证，实现无障碍入市。

Silicone rubber is a non petroleum product and does not rely on the increasingly scarce petroleum resources. It is a general trend that silicone rubber products become a substitute for similar plastic products. Silicone rubber has good low temperature resistance and can still work at - 55 ℃. The heat resistance of silicone rubber is also outstanding. It can work for a long time at 180 ℃, and it can withstａnd several weeks or more at a temperature slightly higher than 200 ℃. It still has elasticity, and can withstａnd high temperatures above 300 ℃ instantaneously. Silicone rubber is physiologically inert, silica gel is non-toxic, tasteless, odorless, does not adhere to human tissue, has anticoagulant effect, and has very little reactivity to human tissue. It is especially suitable for medical materials. At the same time, silicone rubber products can be applied to many application fields that plastic products can not do, such as baby pacifiers, and the application prospect is very broad. All silica gel products can pass FDA certification, SGS certification and European lfgb certification to realize barrier free entry into the market.

硅胶刻字膜 Silica gel lettering film

硅胶刻字膜是使用硅橡胶为基础材料，添加色粉后做成薄膜状，再在硅胶表面贴合热熔胶而成硅胶刻字膜。

Silicone lettering film is made of silicone rubber as the basic material, added toner to make a film, and then bonded with hot-melt adhesive on the surface of silicone to form silicone lettering film.

硅胶刻字膜产品用途：Application of silica gel lettering film

用冲压或刻字机做成需要的LOGO图案，适用于运动服、休闲服、T恤衫、广告衫、文化衫、箱包、鞋帽、围裙等产品。

The logo pattern made by stamping or engraving machine is suitable for sportswear, casual wear, T-Shirts, advertising shirts, cultural shirts, bags, shoes and hats, aprons and other products.

产品特性：Product features

1、有较好的防升华的效果。

2、硅胶产品属环保的材料，热转印硅胶标无毒无味，耐酸、碱、盐 ，耐腐蚀，高温不粘结，低温不开裂，不退色。

3、表面具有肤感，手感像婴儿皮肤般顺滑、层次丰富、色泽鲜艳亮丽、柔软光滑。

4.耐洗水，高弹性、粘牢固、。

5方便：直接烫压到服装、鞋、帽、箱包等。

1. It has good anti sublimation effect.

2. Silica gel products are the most environmentally friendly materials. The heat transfer silica gel label is non-toxic and tasteless, acid, alkali and salt resistant, corrosion-resistant, non binding at high temperature, non cracking and non fading at low temperature.

3. The surface has a skin feeling, and the hａnd feels like a baby's skin, with rich layers, bright s, soft and smooth.

4. Washable, highly elastic, firm and.

5 convenience: directly press clothes, shoes, hats, bags, etc.

烫压方法 Hot pressing method

1、烫印前把温度时间调好，温度设置在145度，压烫时间15秒，压力5KG左右。

2、烫印图案前先把需烫的衣服先压烫一下，看看会不会冒热气，因怕衣服受潮把图案 烫上去影响产品的牢度。

3、烫印后的图案还是热时就不应去拉动图案。

4、熨烫或水洗洗，如有局部未烫牢迹像，可将转移纸覆盖在图像上，重新熨烫粘接，切勿 用熨斗直接熨烫转印部分。

5、不能使用蒸，水汽会影响转印效果。建议使用平板烫画机烫印。若使用专业烫画机，温度设定在145度，时间约15秒（时间视物料而定）。

1、 Before hot stamping, adjust the temperature and time, set the temperature at 145 ℃, press the hot stamping time for 15 seconds, and the pressure is about 5kg.

2、 Before hot stamping the pattern, it's best to press the clothes to be ironed first to see if there will be hot air. For fear that the pattern will be ironed by moisture, which will affect the fastness of the product.

3、 When the hot stamping pattern is still hot, you should not pull the pattern.

4、 When ironing or washing, if there is a part of the image that is not ironed firmly, the transfer paper can be covered on the image and ironed and bonded again. Do not iron the transfer part directly with an iron.

5、 Do not use a steam gun. Water vapor will affect the transfer effect. It is recommended to use a flat hot stamping machine for hot stamping. If a professional hot stamping machine is used, the temperature is set at 145 degrees and the time is about 15 seconds (the time depends on the material).