中国台湾恒温恒湿试验箱介绍
时间：2007-03-29 阅读：671
| Mode | TH-1P- | TH-2P- | TH-3P- | TH-4P- | ||||||||||||||||||||
| Inter Dim.W×H×D(cm) | 40×50×40 | 45×60×45 | 50×75×60 | 100×100×80 | ||||||||||||||||||||
| External Dim.W×H×D(cm) | 92×130×70 | 97×140×75 | 102×155×90 | 152×180×110 | ||||||||||||||||||||
| Temp. Range | -70℃~100℃(+150℃)(A:0℃ B:-20℃ C:-40℃ D:-60℃ E:-70℃ | |||||||||||||||||||||||
| ＊RelativeHumildity Range | 20%~98%R.H. | |||||||||||||||||||||||
| Features | Temp. & huml.constancy | ±0.3℃；±2.5%℃ | ||||||||||||||||||||||
| Temp. & humi. uniformity | ±0.5℃; ±4%R.H. | |||||||||||||||||||||||
| Indication resolution | 0.1℃;0.1%R.H./0.01℃;0.1%R.H. | |||||||||||||||||||||||
| Heat-up time (min.) | About 30 to 50 | |||||||||||||||||||||||
| Pull-down time (min.) | About 45 to 120 | |||||||||||||||||||||||
| Material | Exterior | SUS#304 stainless steel plate | ||||||||||||||||||||||
| Interior | SUS#304 stainless steel plate | |||||||||||||||||||||||
| Insulation | PU & Fiberglass wool | |||||||||||||||||||||||
| Systems | Circulation | Siroco fan | ||||||||||||||||||||||
| Heating | SUS#304 stainless steel high-speed heater | |||||||||||||||||||||||
| Humidifying | Surface evaporating system | |||||||||||||||||||||||
| Cooling | Airtight compressor+evaporator fins+air-cooling condenser | |||||||||||||||||||||||
| Dehumidifying | ADP Critical dewpoint cooling/dehumidifying method | |||||||||||||||||||||||
| Control | Digital electronic indicators, programmable computer controller+S.S.R. | |||||||||||||||||||||||
| Other components | Vacuum glass inspection window, cable p：ort(Φ35mm),control status indicator lights, chamber lamp, experiment separation shelves (freely adjustable 2 pcs). | |||||||||||||||||||||||
| Savety devices | Overheating prevention circuit-breaker,compressor overload protection, control system overload prevention, humidifying system overheating and drying out prevention, breakdown indicator light. | |||||||||||||||||||||||
| Power source | AC 1Φ/3Φ,220V±10%,50/60HZ. | |||||||||||||||||||||||