YSL-S200热升华旗帜机-石家庄屹克永晔数控设备有限公司手机版

详细介绍

启动提示

Startup prompt

如果上时间未使用本设备的话，那么要使用了，自豪先检查下设备，看看是否有灰尘。有灰尘的话就清除下。可以用棉签蘸取酒精将光栅擦拭一下。之后就检查地线是否接好。如果正常的话在开机。机之后，也不要马上进行打印工作。先对喷头进行清洗。主要是排除喷孔内的空气。然后在抽墨的过程中，要注意下排废墨的管道是否有受阻的情况。这些检查完，就可以运行了，运行的时候，也要看下小车是否运行顺畅。

If you have not used this device in the last time, then use it, and take the initiative to check the device to see if there is dust. If there is dust, remove it. You can use a cotton swab to pick up alcohol and wipe the grating. Then check if the ground wire is connected. If it is normal, it is turned on. Do not print immediately after the machine. Wash the nozzle first. Mainly to eliminate the air inside the nozzle. Then, in the process of pumping ink, it is necessary to pay attention to whether the pipeline of the waste ink in the lower row is blocked. After these checks are completed, you can run it. When you run it, you should also see if the car runs smoothly.

技术参数

Technical Parameters

YSL-S200热升华旗帜机技术参数表
型号	YSL-S200
喷头(GN5)	4个喷头(每个喷头1280喷孔）
输出速度	高速模式	2pass	360*480dpi	110平方/小时
	生产模式	3pass	480*600dpi	80平方/小时
	品质模式	4pass	720*600dpi	60平方/小时
打印尺寸	2000MM
干燥系统	红外+烤箱
材料参数	车贴/热转印纸/条幅布（材料厚度1~5mm）
颜色组合	4 colors（C,M,Y,K）
墨水参数	热升华墨水
电脑配置	i7/8G/1TB/USB3.0
操作系统	Windows7/Windows8/Windows10
图像文件格式	PSD/EPS/TIFF/JPG/DWG/HPG/HGL等
RIP软件	Onyx/PrintFactory/Photoprint/Wasatch/Maintop
外观尺寸	4202x970x1650mm
包装尺寸	4360x1100x1700mm
设备重量	GW: 950KG NW:850KG
电源要求	AC220±10% ，单相，50/60HZ
操作坏境要求	温度：20~28度，湿度：45~75%RH

日常操作提示

Daily operation tips

对于YSL-S200热升华旗帜机的日常操作，我们一定要遵守相关的使用说明，做到安全生产。虽然本设备的使用不复杂，但是还是不能忽视正确的操作。在使用的过程中，不要擅自更改厂家的相关设置。我们强烈建议操作员要进行相关的培训，合格后才能上岗。对于旗帜机的喷头拆装一定要严格按照步骤操作。元件的拆装，要在关闭电源的清理下操作。正确的操作和维护，能够提高本设备的使用寿命，从而节约采购成本，创造效益。

For the daily operation of the YSL-S200 Sublimation Flag Machine, we must comply with the relevant instructions for safe production. Although the use of this device is not complicated, the correct operation cannot be ignored. Do not change the manufacturer's settings during use. We strongly recommend that operators perform relevant training and be qualified before they can be employed. For the dismantling and disassembling of the nozzle of the flag machine, it is necessary to strictly follow the steps. Disassembly and assembly of components should be performed under the power-off cleaning. Proper operation and maintenance can increase the service life of the equipment, thereby saving procurement costs and creating benefits.

设备应用

Device application

细节更精彩

More details

产品简介

详细介绍