性能特点

● 本机全电脑操控自动调单，操作容易，简单，可储存1000个钉单。
● 无底有盖箱也可钉（需在订货时说明）。
● 3-5分钟调整尺寸，简单快捷。
● 钉头部动力为伺服电机，机械速度：800钉/分钟。
● 送纸部采用真空吸咐前缘皮带送纸确保纸箱不歪斜，本机送纸前缘皮带可单独调整皮带高
低，增加使用寿命。
● 进纸时有侧拍打装置可使送纸整齐顺利。
● 送纸部送纸速度由PLC自动控制，保证不会出现纸箱钉不出来或钉坏的现象。
● 送纸电机采用伺服电机控制，确保钉距稳定又准确。
● 本机设计有纸箱整形功能，在钉箱时纸箱前后剪刀口不会超过正负2mm。
● 本机可钉双钉、单钉、加强钉、双头尾钉和单头尾钉。
● 本机采用电脑屏操作，并显示故障说明。
● 本机可钉三层、五层纸箱（七层时需在订货时提前声明）。
● 本机最后有自动计数堆码定量输出。
● 本机打捆部分为选配 。
● 机器在正常运转过程中出现歪斜时，会自动停机。
● the machine is controlled by the computer automatically adjust the order, easy to operate, simple, can store 1000 staples.
● bottomless and capped cases can also be stapled (to be specified on order).
● adjust the size in 3-5 minutes, easy and quick.
● the driving force of the nailing head is servomotor, mechanical speed: 800 nailing/min.
● the paper feeding department adopts vacuum suction leading edge belt to ensure that the carton is not askew. The paper feeding leading edge belt of this
machine can adjust the height of the belt independently to increase the service life.
● there is a side flapping device for feeding paper to make it neat and smooth.
● feeding speed by PLC automatic control, to ensure that the carton can not nail out or nail bad phenomenon.
● paper feeding motor is controlled by servo motor to ensure stable and accurate nail spacing.
● the machine is designed with the function of carton shaping, the front and rear scissors of the carton will not exceed plus or minus 2mm when nailing the
box.
● this machine can nail double, single, reinforcing, double head and single head tail nail.
● this machine adopts computer screen operation, and displays fault instructions.
● this machine can be nailed to three-layer and five-layer cartons (for seven-layer cartons, please declare in advance when ordering).
● the machine finally has automatic counting stacking quantitative output.
● the baling part of the machine is optional.
● the machine in the normal operation process of the occurrence of skew, will automatically stop