品牌
其他厂商性质
所在地
|
| ||||||
| 线 路 直 接 成 像（单台面） Laser direct imaging equipment(Single Platform) | ||||||
| 产 品 技 术 规 格 表 product specification | ||||||
| 基本规格specification | 1 | 机型model | TOP-X056D | |||
| 基板pcb | 2 | 基板尺寸pcb max size | 630mm*850mm | |||
| 3 | 最小基板尺寸pcb min size | 200mm*200mm | ||||
| 4 | 基板厚度 pcb thinkness | 0.03mm-5.00mm | ||||
| 制程能力process capability | 5 | 影像线宽线距fine line width line spacing | 30um/30um | |||
| 6 | 量产线宽线距normal line width line spacing | 50um/50um | ||||
| 7 | 数据解析力image-line resolution | 8700dpi | ||||
| 8 | 边缘粗糙度/重复精度repeatability | ±3.0um | ||||
| 9 | 线宽均匀性line width uniformity | ±10% | ||||
| 10 | 对位精度alignment accuracy | ±12.0um | ||||
| 制程工艺process | 11 | 光成像材料sensitive material | 传统干膜、快感湿膜Traditional dry film pleasure wet film | |||
| 12 | 光源规格lamp power | 20W，405±5nm | ||||
| 13 | 推荐应用application field | 硬板、软板、软硬结合板Hard board and soft board | ||||
| 14 | 适用工序Apply process | 内/外层,次外层inner layer and out layer | ||||
| 人机交互man-machine interaction | 15 | 资料格式file format | Gerber 274D/X(推荐)proposal | |||
| 16 | 涨缩管控control increases | 固定涨缩、自动涨缩、分区涨缩、管控预警Fixed automatic expansion and contraction zone expansion and contraction | ||||
| 17 | 动态印章功能 Other function | 日期、时间、序号、涨缩系数、料号、附加信息等Time ordinal coefficient | ||||
| 产能efficiency | 18 | 光机数Number of lasers | 6pcs | |||
| 19 | 产速 efficiency(面/hrs)，以21"*24"计 | 20mj/cm2 | 300 | |||
| 80mj/cm2 | 210 | |||||
| 配件保固Parts warranty | 20 | 光源保固期Lifetime of lasers | 质保两年（限8000小时内）guarantee for two years | |||
| 21 | 光源寿命Expected life time | ≤8000小时有效时间（限两年内）Less than 8000 hours | ||||
| 装机环境Installed environment | 22 | 电力需求Power Requirements | AC380V-50HZ-10KW | |||
| 23 | 气压源需求air requirement | 6kg/cm2 管径Windpipe diameter12mm | ||||
| 24 | 设备重量Weight | 约3800kg about 3800kg | ||||
| 25 | 设备外形尺寸product shape size | 2802mm(L)*1838mm(W)*1913mm(H) | ||||
| 26 | 洁净度要求clean level | 万级或千级Ten thousａnd or thousands | ||||
| 27 | 温度/湿境要求temperature and humidity | 22±2℃，50%±10%RH | ||||
| 因生产设计需求，规格按修改后双方确认为凖！ Due to production design requirements, the specification shall be revised and confirmed by both parties | ||||||
