模切部功能：

1、胶垫辊机械螺旋式横向移动，移动距离为50mm。

2、模切辊相位采用PLC及电动数字式360°调整，停机及运转情况下均可调整。(也可选用PLC及触摸屏调整)

3、模切辊横向移动采用PLC及电动数字输入式调整，调整范围±10mm。

(也可选用PLC及触摸屏调整)

4、胶垫辊与模切辊间隙调整采用自锁结构，并配有气缸大范围快速调整，减少胶垫损坏，增加胶垫使用寿命。

5、送纸辊间隙调整采用自锁结构。

6、速度补偿装置，可使优力胶辊随模版辊滑动，从而使胶垫辊的表面速度由刀模控制，使模切的纸箱与刀模形状*一致。

7、机器配有优力胶修正装置，可对优力胶反复多次修整后使用。

8、模切辊圆周轴向可选做T型槽，用散模切版拼装而成代替整张模版，节约作普通箱的制版费用。

Function of Die Cutting Department:

1.The rubber roller adopt mechanical control the position move left and right. The movement distance is 50mm.

2.The phase of the die-cutting unit adopt PLC and electric 360°adjust, accord the error to input the adjust data, can be adjusted while the machine running or stop.(PLC with touch screen adjustment as an option)

3.The horizontal moving of the die roller adopt PLC and electric adjustment, input the adjust data accord the error, adjusting distance is 10mm.(PLC with touch screen adjustment as an option)

4.The space adjustment between rubber roller and die roller adopt self-locking structure, with cylinder big scope quickly adjust, decrease the rubber wear, increase the rubber life.

5.The space adjustment between the feed rollers adopt self-locking structure.

6.The unique speed compensation device can make the rubber roller rolling running with the die roller, make the surface speed of the rubber cushion is completely controlled by the die roller, the shape of the carton sheet will absolutely equal to the die pattern.

7.There is a rubber repair device with the machine, the rubber can be used after be repaired.

8.Die-cutter roller can choose T-type groove, use the part die-cutter mould together to instead of the whole mould,to save the mould-making fee.