PRO 系列注塑机LS210-350-台州市黄岩朗斯塑料机械有限公司手机版

详细介绍

PRO 系列注塑机LS210-350

产品参数

GH210-350
CLAMPING WAY		五铰斜直FIVE REAM SKEW LINE								二板液压2-PLATE HYDRAULIC CLAMPING
INJECTION UNIT	单位	GH210		GH230	GH260		GH300	GH350		GH130-210	GH170-260	GH210-350
		Ⅰ	Ⅱ	Ⅱ	Ⅰ	Ⅱ	Ⅱ	Ⅰ	Ⅱ	Ⅲ	Ⅲ	Ⅲ
Screw diameter	mm	45	45	45	45	45	50	50	55	40	45	50
Screw stroke	mm	225	225	225	225	225	225	200	250	150	175	200
Screw L:D	L/D	25	25	25	25	25	25	25	23	25	25	25
Shot volume	cm³	358	358	358	358	368	420	392	594	188	278	393
Shotweight PS	g	322	322	322	322	322	378	353	534	170	250	353
Injection pressure	Mpa	156	157	157	156	157	164	164	168	144	150	155
Dwell pressure	kgf/c㎡	1587	1599	1599	1587	1599	1675	1675	1710	1466	1532	1586
Injection speed	mm/sec	287	312	312	287	312	400	380	330	300	300	300
Injection rate	cm³/sec	456.7	496.5	496.5	456.7	496.5	549	549.5	546.2	376.8	476.9	588.8
Screw rotate speed	rpm	400	400	400	400	400	400	400		450	450	450
Nozzle sealing force	KN	54.4	40.6	40.6	54.4	40.6	40.6	46		35.2	40.6	40.6
Nozzle advance stroke	mm	50	80	80	50	80	80	80		80	80	80
Heater power	KW	12.82		12.82	12.82		12.82	17		12.82	14.1	19.2
CLAMPING UNIT
Clamp force	KN	2100		2300	2600		3000	3500		1300-2100	1700-2600	2100-3500
Toggle stroke	mm	490		490	560		560	700		定制	定制	定制
Space between tie bars	mm	520×520		570×520	570×570		620×570	700×700		500×500	600×600	700×700
Max.mould height	mm	550		670	600		750	750		定制	定制	定制
Min.mould height	mm	210		300	240		350	350		定制	定制	定制
Ejector number	pc	5		5	5		5	5		5	5	5
Ejector force	KN	21		21	21		21	80.4		61.5	61.5	80.4
Ejector stroke	mm	150		150	160		160	180		定制	定制	定制
OTHERS
Special pump pressure	Mpa	21		21	21		21	23		23	23	23
Machine dimensions(L×W×H)	m	5.64×1.3×1.86		5.7×1.4×1.9	6.05×1.4×1.95		6.2×1.6×2.1	7.2×1.8×2.3
Machine weight	T	8.3		8.7	9.5		10.2	17
Oil tank capacity	L	300		300	350		350	600		350	450	550
Pump motor power	KW	30(55)		30(55)	30(55)		35(75)	35(75)		22	30	22＋18.2

产品简介

详细介绍