进口多级离心油泵美国多级离心油泵

进口多级离心油泵工作原理;

离心油泵轴在电动机的带动下旋转，对液体作功，使其能量增加，从而使需要数量的液体由吸入池经由泵的进水段、正叶轮、正导叶、中段、出水段的水平出水口、过渡管、次级进水段、反叶轮、反导叶、出水段的垂直出水口后，将液体*的送出。

进口多级离心油泵产品零件材质：材质均为铸铁或铸钢，如有材质要求可另行定做。

进口多级离心油泵产品参数：

流量：6.25-155m3/h
扬程：70-603m

功率：5.5-400kw
转速：2950r/min
口径：40-150mm
工作温度：-20℃～+300℃
工作压力：1.6-10.0Mpa
材质：铸铁、铸钢、不锈钢

进口多级离心油泵应用领域：

主要可用在石油精制、石油化工和化学工业及其他地方输送不含固体颗粒的石油、液化石油气等介质，泵壳径向部分，特别适用于输送高温高压以及易燃、易爆或有毒的液体。

进口多级离心油泵产品选型：

1、装置系统所需的压力是选齿轮多级离心油泵的又一重要性能数据，一般要用放大5%—10%余量后压力来选择摆线齿轮泵的型号。这包括：吸油池压力，排油池压力，管道系统中的压力降（压力损失）。

2、齿轮多级离心油泵装置系统的管路布置条件指的是送液高度、 送液距离、送液走向。以便进行系统压力计算和动力校核。管道系统数据如果需要的话还应作出装置特性曲线。

3、齿轮多级离心油泵的操作条件很多，如液体的操作温度、吸入侧压力、排出侧容器压力、海拔高度、环境温度、操作是间隙的还是连续的、齿轮泵的位置是固定的还是可移的

美国泰乐TYLER进口多级离心油泵售后服务：

用户*，信誉*，优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证，我公司服务质量管理体系的宗旨是：建立并不断完善科学、合理、高效的服务质量管理体系，公正、准确、及时地完成客户的售后服务质量保障工作，为我公司的客户服务建立良好、全面、充分的服务体系。

Multi stage centrifugal pump

Working principle of imported multistage centrifugal pump;

Centrifugal pump shaft rotates under the drive of the motor, the power of the liquid, its energy increases, so that the quantity of liquid from the suction tank through the water inlet section of a pump, impeller, guide vane, it is the middle section of the water level, water outlet pipe, a water inlet section, transitional secondary impeller, guide vane, anti reverse the water vertical outlet, the liquid will be sent Everfount.

Imported multi-stage centrifugal pump product parts materials: materials are cast iron or cast steel, if the material requirements can be customized.

Imported multistage centrifugal pump:

Flow: 6.25-155m3/h

Lift: 70-603m

Power: 5.5-400kw

Speed: 2950r/min

Caliber: 40-150mm

Operating temperature: -20 C ~ +300 C

Working pressure: 1.6-10.0Mpa

Material: cast iron, cast steel, stainless steel

Application of imported multistage centrifugal pump:

Mainly used in petroleum refining, petrochemical and chemical industries and other local delivery of solid particles in oil and liquefied petroleum gas medium, the pump shell radial part, especially suitable for high temperature and high pressure and transport of flammable, explosive or toxic liquid.

Selection of imported multistage centrifugal pump:

1, the pressure required for the installation of the system is another important performance of the centrifugal pump selection of performance data, the general use of the enlarged 5% - 10% margin pressure to select the cycloid gear pump model. This includes: oil suction tank pressure, oil drain tank pressure, piping system pressure drop (pressure loss).

2, the gear multistage centrifugal pump installation system piping layout refers to the delivery of liquid height, liquid delivery distance, liquid delivery. In order to carry out the system pressure calculation and dynamic check. Piping system data should also be made if necessary.

3, gear multistage centrifugal pump operating conditions, such as the operation of the liquid temperature, suction pressure, pressure from the container side, altitude, ambient temperature, or space operations are continuous, the position of the gear pump is fixed or may shift

The United States imported TYLER Taylor multistage centrifugal pump service customer service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.

进口多级离心油泵guan网：http://www.twvalve。。ｎｅｔ/html/2175.html