按需求 三机一体除湿干燥机
产品简介
气中时，即开始从大气中吸收湿气，若是以一般传统热风式料桶烘干机，因为是以带有湿气的外气去干燥塑料，故无法防止塑料继续吸收湿气。
详细信息
特点
1：稳定的为烘干提供-40℃~-50℃的露点。
2：采用双层不锈钢料桶保温省电，清洁简易。
3：闭环式控制减少热量与粉尘排放，省电更能环保及厂房清洁。
4：采用无触点固态继电器控制加热。
5：无需冷却水及冷却器。
6：压缩式系统比其他蜂巢及双桶式省电30%。
Characteristics
1：Stable to provide the most suitable for drying the dew point of -40°C to-50°C；
2：Double stainless steel drum insulation energy saving, clean and simple；
3：Closed loop control to reduce the heat and dust emissions, energy saving and better environmental protection and plant cleaning；
4：No-contact solid-state relay to control the heating；
5：Without cooling water and coolers；
6：Compression system than other cellular and double barrel power saving of 30%；
干燥程式
1：在变缸除湿塔内急速降压的同时，就能获得-40℃的露点除湿气。
2：除水除油节俭程式将车间送的压缩空气中的水份及油份过滤清器，再送到除湿塔。
3：把-40℃至-50℃露点除湿气（单向输送）不停的送到密封式真空除湿料桶，将料桶内素有原材料的湿气吸干。
4：该系统是单向送气，无须使用再生除湿气。
Drying program
1：Variable cylinder dehumidification tower rapid buck at the same time, you can get the dew point of -40 ° C in addition to the moisture；
2：In addition to water, oil frugal program in the workshop to send the compressed air moisture and oil over the filter, and then sent to the dehumidification tower；
3：Sent to the -40 ° C to -50 ° C dew point （one-way transmission） in addition to moisture sealed vacuum dehumidifier drums, the drums known as the raw material moisture sucking；
4：The system is one-way aspirated, without the use of renewable addition to moisture；