| ◎ 体积小、重量轻，可直接放置在干燥机或其他原料容器上，完成自动上料工作。
◎ 微电脑操作控制程序。
◎ 过载、缺料报警。
◎ 300G采用高速整流马达，体积小、吸力强，适合用于新料输送。
◎ 400G采用感应式高压风机，噪音小、寿命长。
◎ *采用线控器控制，机台下即可设定、控制，方便、快捷。设有空气过滤器（可选件）。
◎ Small footprint&light,to be placed directly on other machineor container for auto loading.
◎ Microcomputer controlled.
◎ Alarm for overload and lack of material.
◎ High-speed rectificative motor of small footprint and strongsuction force for new material for AL-300G.
◎ Induction high-pressure pump of low noise and long servic timeforAL-400G.
◎ Cable-contrlo,easy to set and control.
◎ Filter available.
◎ 参数中的输送能力及吸料扬程是以SBS原料为测试材料得出的数据，实际参数根据塑料比重、形状及输送长度、高度、管路特性、参数设定等因素而改变。
◎ 吸料机在输送热料时，料管需选配耐160度高温料管。
◎ The parameters of the conveying capacity and suction lift are educed from tests on ABS.The actual parameters may be different due to the differences of the specific gravity and the shape of the material,the conveying distance and height,the specialty of pipeline and the seting of parameters.
◎ Heat-resistant（160℃）pipes should be used when conveying hot material. | 型号（Model） | AL-300G | AL-400G | | 马达Motor | 型式Type | 碳刷式 Carbon brush | 感应式Induction | | 规格Specification | 1KW/1.3HP1Ф | 0.75KW/1HP3Ф | | 输送能力（kg/h）Conveying capacity | 300-350 | 300-400 | | 吸料扬程（m）Loading distance | 4 | 4 | | 静风压（mm/H2O） Static wind pressure | 1300 | 1400 | | 储料筒容量（L）Reservoir volume | 7.5 | 12 | | 送料管内径（mm）Convering tube inner dim | Ф38 | Ф38 | | 配送料管 Specification of the attached hoses | Ф38mm×3.5m 2pcs | Ф38mm×4m2pcs | | 外形尺寸（cm）Dimensions | 34×34×59 | 45×37×66 | | 净重（kg）Net weight | 12 | 27 | |
