光纤打标机
产品简介
详细信息
产品详情
技术参数 TECHNICAL PARAMETERS
| 设备型号 | 光纤-10/20/30W | EP端泵-10/12/20W | 紫外-5W | CO2-30W | CO2-10/30/50W | 光纤-10/20/30W |
| 激光波长 | 10.64μm | 1064nm | 355nm | 1064μm | 10.64μm | 10.64μm |
| 输出功率 | 10/20W | 10W | 1W/3W/5W/8W | 30W | 10W | 10/20W |
| 激光重复频率 | 20-80KHz | 1-80KHz | 8-15KHz | ≤20KHz | ≤20KHz | 20-80KHz |
| 雕刻深度 | ≤0.5-0.7mm | ≥0.4mm | ≥0.3mm | ≤3mm | ≤2mm | ≤0.5-0.7mm |
| 雕刻范围 | 110mm*110mm 160mm*160mm(可选) | 110mm*110mm 300mm*300mm(可选) | 50mm*50m m110mm*300mm(可选) | 110mm*110mm 300mm*300mm(可选) | 110mm*110mm 175mm*175mm(可选) | 110mm*110mm 160mm*160mm(可选) |
| 线速 | ≤12000mm/s | ≤30000mm/s | ≤7000mm/s | ≥7000mm/s | ≤7000mm/s | ≤12000mm/s |
| 最小字符 | 0.09mm | 0.1mm | 0.12mm | 0.4mm | 0.4mm | 0.09mm |
| 线宽 | 0.006mm | 0.01mm | 0.01mm | 0.1mm | 0.1mm | 0.006mm |
| 重复精度 | ±0.02mm | ±0.02mm | ±0.002mm | ±0.01mm | ±0.01mm | ±0.02mm |
| 整机耗电功率 | 0.6KW | ≥1000W | ≥2KW | ≥1.2KW | 500W | 0.6KW |
| 制冷方式 | 风冷 | 风冷 | 水冷 | 风冷 | 风冷 | 风冷 |
| 供电要求 | AC220V±15% 50/60Hz | AC220V±15% 50/60Hz | AC220V±15% 50/60Hz | AC220V±15% 50/60Hz | AC220V±15% 50/60Hz | AC220V±15% 50/60Hz |