包装印刷产业网

热熔胶封盒机使用说明

本机器集电气一体自动化控制生产、电气元件采用优质产品性能稳定、生产速度40-50盒1分钟，封盒规格（长×宽×高）（100-290）×（70-150）×（45-120）mm，装机功率0.5-0.89KW（220V50HZ），源0.4mpa,0.3M³/min。

1. 工作原理：将盒子向里推，当盒子碰到行程开关1时，上胶气缸自动上升，将胶水沾在盒子两端。上胶气缸设有磁感应开关，当气缸上升至磁感应开关感应范围气缸会自动下落。同时顶盒气缸上升，将盒子折叠成形。顶盒磁感应开关感应时气缸会自动下落。当气缸自动下落后，第二个盒子方可向里推。当盒子碰到行程开关2时，出盒气缸开始工作，将盒子推向分流槽，当气缸上升至磁感应开关感应范围气缸会自动下落。

2.简单故障检查 simple failure checking

故障现象 failure symptom	检查内容 check content
机器不工作machine is out of work	1. 电源插头是否插入 the power plug whether insert 2. 电源开关是否打开 the power switch whether turn on 3. 气压是否正常 the air pressure whether normal 4. 检查行程开关1是否工作 check the travel switch 1 whether work
上胶后顶盒气缸不工作 after gluing the jacking box air cylinder doesn’t work	1. 检查上胶磁感应开关是否工作 check the gluing magnetic induction switch whether work 2. 检查顶盒电磁阀是否工作 check the jacking box electric magnetic valve whether work
顶盒气缸上升后不下落 jacking box air cylinder doesn’t fall after rise	检查顶盒磁感应开关是否工作 check the jacking box magnetic induction switch whether work
出盒气缸不工作 eject box air cylinder doesn’t work	检查行程开关2是否工作 check the travel switch 2 whether work
出盒气缸不下落 eject box air cylinder doesn’t fall	检查出盒磁感应开关是否工作 check the eject box magnetic induction switch whether work
胶箱温度失控 temperature of glue box is out of control	1. 检查电热隅 check the thermo couple 2. 检查加热棒 check the heat stick 3. 如以上两点均无问题，详见温控表使用说明书 if the above two points all without problem, please see the operate manual detail of the temperature controller meter
上胶气缸1和2未同步 gluing air cylinder 1 and 2 doesn’t synchronize	调整气缸两端节流阀 adjust the both ends throttle valve of air cylinder

应用案例范围:

生产以热熔胶广泛用于家热熔胶喷胶、涂胶、电子产品组装、不干纸盒、胶贴包装行业:纸箱包装、饮料包装，涂布复合行业: 等相关行业自动化设备。

Box sealing machine instructions

This machine combine electricity into one, automatic control production, electric component adopt the high quality products, steady performance ,production speed :40-50 boxes /one minute, sealing standard(L×W×H) （100-290）×（70-150）×（45-120）mm，install power 0.5-0.89KW（220V50HZ），air source 0.4mpa,0.3M³/minWorking principle : push the box inward, when the box touch the travel switch one ,gluing air cylinder will rise automatically to stick the glue on the both ends of box, gluing air cylinder with the magnetic induction switch ,when the air cylinder rise to the induction switch range ,air cylinder will fall automatically, meanwhile jacking box air cylinder rise ,fold the box into shape. When jacking box magnetic induction switch react, the air cylinder will fall automatically, after the air cylinder fall, the second box will be pushed inward. When the box touch the travel switch two, the eject box air cylinder starts to work , push the boxes to the distributary tank, when air cylinder rise to the induction range of magnetic induction switch, which will fall automatically.