PENTEST 德国Elektrophysik（EPK）PENTEST笔式涂层测厚仪
产品简介
详细信息
产品描述
德国Elektrophysik（EPK）PENTEST笔式涂层测厚仪------新一代拉拔式涂层测厚仪，PENTEST是德国EPK公司新推出的一款坚固的笔试涂层测厚仪 应用磁吸力原理，用于快速无损简便地测量铁基体上的非磁性涂层，如钢铁上的涂料、搪瓷等。测量范围25 - 700μm。PENTEST手持式笔式涂层测厚仪可保持保留*后一个读数，测量原理符合DIN EN ISO 2178.不需要电池或其他电源。设计为钢笔样式，便于携带，可在任何地点任何时间进行测量，只需将仪器*放在干燥的油漆涂层上即可。使用你的拇指，使其与被测表面紧密接触。 然后小心地拉起黑色滑块，直到磁铁离开涂层表面。
| PENTEST产品特点 | PENTEST技术参数 |
| 无损测量铁基上的非磁性涂层,如油漆、搪瓷、橡胶、铬钢。 采用性磁头 无需电源供应 无需标定 在任何角度可以测试 操作简单，携带方便 价格便宜 | 测量范围： 25-700um或1-28mils 小测量面积： 直径25mm 精确度： ±10%读数 环境温度： -10~+80℃ 体积： 长151mm，直径10mm 德国EPK还有MINI PEN笔式测厚仪，量程为50-500um。精确度： ±15%读数。 其他测厚系列有：MikroTest系列，MiniTest系列。 |
PENTEST英文介绍
Featuring a patented HOLD mechanism, this dry film gauge keeps the thickness indicator in place for easy reading. The HOLD mechanism can be used as a “memory” for the last reading. Major applications are quick-check measurements on steel constructions, painted steel panels and all kinds of steel substrates. Measuring principle according to DIN EN ISO 2178. No batteries or other power supply required.
Easy to use:
Designed as a pen with a pocket clip, the gauge is ready for use at any place or time. Just place the tip of the gauge onto the dry paint coating as shown on the photo. Use your thumb to give it a firm contact to the surface to be measured.
Then pull up carefully the black slide until the magnet lifts off from the coating surface. Read coating thickness in microns on the 50 mm long scale, longer than the scale of any other pull-off gauge.
Application
Non-destructive measurement of: