CH1900F注塑机
产品简介
详细信息
| 型号规格 Specifications | 单位 UNIT | CH1900F | ||
| 号International size rating | 23800 | |||
| 注射装置 INJECTION UNIT | A | B | C | |
| 螺杆直径 Screw diameter | mm | 130 | 145 | 150 |
| 螺杆长径比Screw L/D ratio | L/D | 24.5 | 22.0 | 20.5 |
| 理论注射容积Theoreticai shot volume | cm3 | 10619 | 13210 | 12370 |
| 注射量 Shot weight(PS) | g | 9769 | 12154 | 14798 |
| OZ | 345 | 429 | 522 | |
| 注射压力 Injection pressure | Bar | 223.7 | 179.8 | 150.1 |
| 注射速率 Injection rate(PS) | g/s | 1080 | 1343 | 2233 |
| 射胶行程Injection stroke | mm | 665 | ||
| 螺杆转速 Max.screw speed | rpm | 0-107 | ||
| 塑化能力 Plasticizing capacity(PS) | g/s | 161 | 212 | 223 |
| 射嘴接触力Nozzle sealing force | KN | 285 | ||
| 锁模装置 CLAMPING UNIT | ||||
| 锁模力 Clamping force | KN | 19000 | ||
| 开模行程 Opening stroke | mm | 1680 | ||
| 拉杆内间距Distance between tie-bars | mm | 1660x1550 | ||
| 最小模具尺寸Min mould dimension | mm | 700-1600 | ||
| 最小模厚 Max.mold height | mm | 1600 | ||
| 最小模厚 Min.mold height | mm | 700 | ||
| 模板开距MAX.Dalylight | mm | 3700 | ||
| 顶出行程Ejector stroke | mm | 380 | ||
| 顶出力 Ejector force | KN | 326 | ||
| 顶出数 No.of ejector pins | PCS | 24+1 | ||
| 其它 OTHERS | ||||
| 系统压力System pressure | Mpa | 16 | ||
| 油泵排量Hydraulic pump capacity | CC | 163+163+163 | ||
| 电马达功率Drive mootor power | kw | 36x4 | ||
| 电热功率 Heator Power | kw | 53.1 | ||
| 加热段数 No.of heater zones | pcs | 6+1 | ||
| 外形尺寸Machine dimensions(LxWxH) | m | 16x3.1x3.27 | ||
| 理论机重 Machine weight | Tom | 130.0 | ||
| 邮箱容积 Oil tank capacity | L | 2400 | ||
| 模板正面尺寸图 Platen dimensions | ||||
| 模板侧面尺寸图 Mould space dimensions | ||||