CH600F注塑机
产品简介
详细信息
| 型号规格 Specifications | 单位 UNIT | CH600F | |||
| 号 International size rating | 3220 | ||||
| 注射装置 INJECTION UNIT | A | B | C | D | |
| 螺杆直径 Screw diameter | mm | 75 | 80 | 85 | 90 |
| 螺杆长径比Screw L/D ratio | L/D | 21 | 20 | 19 | 18 |
| 理论注射容Theoreticai shot volume | cm3 | 1727 | 1965 | 2219 | 2487 |
| 注射量 Shot weight(PS) | g | 1572 | 1788 | 2019 | 2264 |
| OZ | 55.4 | 63.1 | 71.2 | 79.8 | |
| 注射压力 Injection pressure | Bar | 1865 | 1639 | 1452 | 1295 |
| 注射速率 Injection rate(PS) | g/s | 424 | 483 | 545 | 611 |
| 射胶行程 Injection stroke | mm | 391 | |||
| 螺杆转速 Max.screw speed | rpm | 136 | |||
| 塑化能力 Plasticizing capacity(PS) | g/s | 60.2 | 72.5 | 79.6 | 90 |
| 射嘴接触力Nozzle sealing force | KN | 141 | |||
| 锁模装置 CLAMPING UNIT | |||||
| 锁模力 Clamping force | KN | 6000 | |||
| 开模行程 Opening stroke | mm | 770 | |||
| 拉杆内间距Distance between tie-bars | mm | 882x800 | |||
| 最小模具尺寸Min mould dimension | mm | 575x520 | |||
| 最小模厚 Max.mold height | mm | 810 | |||
| 最小模厚 Min.mold height | mm | 330 | |||
| 模板开距MAX.Dalylight | mm | 1580 | |||
| 顶出行程Ejector stroke | mm | 200 | |||
| 顶出力 Ejector force | KN | 125 | |||
| 顶出数 No.of ejector pins | PCS | 12+1 | |||
| 其它 OTHERS | |||||
| 系统压力System pressure | Mpa | 16 | |||
| 油泵排量 Hydraulic pump capacity | CC | 100+63 | |||
| 电马达功率 Drive mootor power | kw | 55 | |||
| 电热功率 Heator Power | kw | 33.5 | |||
| 加热段数No.of heater zones | pcs | 5+1 | |||
| 外形尺寸Machine dimensions(LxWxH) | m | 8.95x2.2x2.38 | |||
| 理论机重 Machine weight | Tom | 26 | |||
| 邮箱容积 Oil tank capacity | L | 900 | |||
| 模板正面尺寸图 Platen dimensions | |||||
| 模板侧面尺寸图 Mould space dimensions | |||||