CH360F注塑机
产品简介
详细信息
| 型号规格Specifications | 单位 UNIT | CH360F | |||
| 号International size rating | 2040 | ||||
| 注射装置INJECTION UNIT | A | B | C | D | |
| 螺杆直径 Screw diameter | mm | 60 | 65 | 70 | 75 |
| 螺杆长径比Screw L/D ratio | L/D | 23 | 22 | 20 | 19 |
| 理论注射容积Theoreticai shot volume | cm3 | 990 | 1161 | 1347 | 1546 |
| 注射量 Shot weight(PS) | g | 901 | 1057 | 1226 | 1407 |
| OZ | 31.8 | 37.3 | 43.2 | 49.6 | |
| 注射压力Injection pressure | Bar | 2069 | 1763 | 1520 | 1324 |
| 注射速率Injection rate(PS) | g/s | 235 | 275 | 319 | 367 |
| 射胶行程Injection stroke | mm | 350 | |||
| 螺杆转速Max.screw speed | rpm | 154 | |||
| 塑化能力 Plasticizing capacity(PS) | g/s | 51.1 | 56.7 | 64.4 | 67.5 |
| 射嘴接触力Nozzle sealing force | KN | 141 | |||
| 锁模装置 CLAMPING UNIT | |||||
| 锁模力 Clamping force | KN | 3600 | |||
| 开模行程 Opening stroke | mm | 660 | |||
| 拉杆内间距Distance between tie-bars | mm | 730x680 | |||
| 最小模具尺寸Min mould dimension | mm | 475x445 | |||
| 最小模厚Max.mold height | mm | 680 | |||
| 最小模厚 Min.mold height | mm | 250 | |||
| 模板开距AX.Dalylight | mm | 1340 | |||
| 顶出行程 EjMector stroke | mm | 160 | |||
| 顶出力 Ejector force | KN | 70 | |||
| 顶出数No.of ejector pins | PCS | 12+1 | |||
| 其它 OTHERS | |||||
| 系统压力System pressure | Mpa | 16 | |||
| 油泵排量 Hydraulic pump capacity | CC | 125 | |||
| 电马达功率Drive mootor power | kw | 37 | |||
| 电热功率Heator Power | kw | 22.8 | |||
| 加热段数 No.of heater zones | pcs | 4+1 | |||
| 外形尺寸 Machine dimensions(LxWxH) | m | 6.9x1.9x2.35 | |||
| 理论机重Machine weight | Tom | 14 | |||
| 邮箱容积Oil tank capacity | L | 550 | |||
| 模板正面尺寸图 Platen dimensions | |||||
| 模板侧面尺寸图 Mould space dimensions | |||||