CH300F注塑机
产品简介
详细信息
| 型号规格 Specifications | 单位 UNIT | CH300F | |||
| 号International size rating | 1440 | ||||
| 注射装置 INJECTION UNIT | A | B | C | ||
| 螺杆直径 Screw diameter | mm | 55 | 60 | 65 | |
| 螺杆长径 Screw L/D ratio | L/D | 22 | 20 | 18.5 | |
| 理论注射容Theoreticai shot volume | cm3 | 713 | 848 | 995 | |
| 注射量 Shot weight(PS) | g | 649 | 772 | 906 | |
| OZ | 22.9 | 27.2 | 32.0 | ||
| 注射压力 Injection pressure | Bar | 2023 | 1700 | 1449 | |
| 注射速率 Injection rate(PS) | g/s | 192 | 228 | 268 | |
| 射胶行程 Injection stroke | mm | 300 | |||
| 螺杆转速 Max.screw speed | rpm | 160 | |||
| 塑化能力 Plasticizing capacity(PS) | g/s | 41.4 | 49.1 | 54.6 | |
| 射嘴接触力Nozzle sealing force | KN | 83 | |||
| 锁模装置 CLAMPING UNIT | |||||
| 锁模力 Clamping force | KN | 3000 | |||
| 开模行程Opening stroke | mm | 550 | |||
| 拉杆间距Distance between tie-bars | mm | 630x580 | |||
| 最小模具尺寸Min mould dimension | mm | 410x380 | |||
| 最小模厚Max.mold height | mm | 620 | |||
| 最小模厚Min.mold height | mm | 230 | |||
| 模板开距MAX.Dalylight | mm | 1170 | |||
| 顶出行程Ejector stroke | mm | 150 | |||
| 顶出力Ejector force | KN | 70 | |||
| 顶出数 No.of ejector pins | PCS | 12+1 | |||
| 其它 OTHERS | |||||
| 系统压力System pressure | Mpa | 16 | |||
| 油泵排量Hydraulic pump capacity | CC | 100 | |||
| 电马达功率Drive mootor power | kw | 30 | |||
| 电热功率 Heator Power | kw | 13.5 | |||
| 加热段数 No.of heater zones | pcs | 4+1 | |||
| 外形尺寸Machine dimensions(LxWxH) | m | 5.8x1.72x2.25 | |||
| 理论机重Machine weight | Tom | 10 | |||
| 邮箱容积Oil tank capacity | L | 430 | |||
| 模板正面尺寸图 Platen dimensions | |||||
| 模板侧面尺寸图 Mould space dimensions | |||||