包装印刷网

产品介绍：

EM2210 non-contact thickness gauge measures thickness of steel pipes, flat steel, rods and other steel constructions, together with constructions made of aluminium and other metals. Measurements can be taken without usage of couplant, without advance surface preparation and across the operating gap between the transducer and the test object of up to 3 mm. Rust film, salt deposits or any other insulating coat (paint, varnish, enamel, plastic etc.) can serve as an operating gap.

EM2210非接触式测厚仪用于测量钢管,钢板,棒和其他钢铁结构的厚度,以及铝和其他金属测厚。测量时不需要使用耦合剂,表面不用处理和整个操作的传感器和测试对象之间的间隔可达3毫米, 防锈膜、盐沉积物或任何其他绝缘涂层（油漆、清漆、搪瓷、塑料等）都可以作为操作间隙。

Test indications are slightly dependable on the skew of the transducer, unlike tradition thickness gauges with piezoelectric converters, which require fixating transducer at the specific position. Special data processing algorithm used in the EM2210 allows measuring thickness correctly even in the presence of disruptors such as metal anisotropy, several reflectors and external noise. The algorithm designed by our specialists helps to reduce influence of human factor and simplify the device interface.

在传感器的斜度上，测试指标非常可靠，不像传统的厚度测量与压电转换器，要求固定传感器在特定位置。在EM2210中使用的特殊数据处理算法允许在金属各向异性、多个反射器和外部噪声等干扰因素的情况下得到正确测量厚度。由专家设计的算法有助于降低人为因素的影响，简化设备接口。

Connected with a tablet, smartphone or other devices based on Android OS, the EM2210 becomes an advanced flaw detector that allows users to display and save A-scan and B-scan, operate with gates, chose thickness measurement mode, signal processing parameters etc.

与平板电脑、智能手机或基于Android操作系统的其他设备，该em2210成为一个*的探伤仪，允许用户存储和显示A、B型，操作门，选择厚度测量模式，信号处理参数等。

If connected with tablet, smartphone or any other Android device, thickness meter EM2210 can operate as a modern non-destructive testing unit, suitable for A-scan and B-scan display and saving, also with opportunity to work with strobes, chose thickness measure mode, signal processing parameters etc.

如果连接平板电脑、智能手机或其它任何Android设备，em2210测厚仪可以作为一个现代无损检测装置，适用于A、B型显示和保存，也有机会与闪光灯，选择厚度测量模式，信号处理参数等。

产品图片：