ND气动平面曲面烫金机
产品简介
详细信息
产品特点
微电脑程序控制.气动元件驱动。
烫印压力.温度.时间可调.
工作台可手动前后移动.便于安全快速操作。
工作台可前后、左右、旋转调节。
自动送纸、收纸、并可调.
根据工件的不同高度，可以分别通过手柄和
气缸调整螺母调节烫印头的高度和气缸行程.
用于烫印曲面/圆面:卸下梭动工作台即为平
面烫金机。
产品技术参数
烫板面积 10OX168mm
工作台尺寸 108X108mm
烫印头行程 25-75mm(可调)
烫印温度选择范围室温 ~280度
工件高度} 95mm
烫印压力选择范围 ≤130kgf
烫印速序} 1000pcs/hr
电源 220v 50Hz
发热功率 900W
气源压力 4-7bar
耗气量 ≤58L/min
外形尺寸 630X58OX1385mm
Product Features
Microcomputer control. Pneumatic drive.
Stamping pressure. Temperature. Time is adjustable.
Table can be moved back and forth manually. Facilitate safe and fast operation.
Workbench can be front, left, rotate adjustment.
Automatic document feeder, delivery and adjustable.
Depending on the height of the workpiece, respectively, through the handle and can be
Stamping cylinder head adjusting nut to adjust the height and cylinder stroke.
For stamping Surface / round face: Remove the shuttle table is flat
Surface bronzing machine.
Technical Parameters
Hot plate area 10OX168mm
Table size 108X108mm
Stamping head stroke 25-75mm (adjustable)
Stamping Temperature range from room temperature to 280 degrees
Maximum workpiece height} 95mm
Stamping pressure range ≤ 130kgf
Maximum speed stamping sequence} 1000pcs/hr
Power supply 220v 50Hz
Heating power 900W
Air pressure 4-7bar
Consumption ≤ 58L/min
Dimensions 630X58OX1385mm