包装印刷产业网

全自动高速电脑螺横切机是瓦楞纸板生产线的重要单机之一。全自动高速电脑螺横切机因传动控制方式不同，分机械横切机和电脑控制横切机。电脑横切机是通过工业控制计算机控制，按设定长度，控制刀轴运转切断纸板，加之机械部分的   传动，可将切纸误差控制在±1mm范围内。全自动高速电脑螺横切机   适合高速切厚纸板，且切纸平稳，刀片寿命长。

Full automatic high speed computer (straight) spiral knife cutting machine is one of the most important single corrugated cardboard production line. Full automatic high speed computer spiral knife straight knife cutting machine for transmission control in different ways, mechanical cutting machine and computer control cutting machine. Computer cutting machine is by industrial control computer control, according to the set length, control the knife shaft operation cut paper board, coupled with precise transmission of mechanical parts, paper cutting error within plus or minus 1 mm range of control. Full automatic high speed computer (straight) spiral knife cutting machine is more suitable for high speed cutting cardboard and paper cutting blade, smooth, long service life.

全自动高速电脑螺横切机功能特点：

1、采用或螺旋刀剪切方式，双辊轮转差口剪切。双组刀辊上下串联配置，可同时生产两种不同长度规格的纸板。

2、人机界面分离，彩屏显示生产，可随时查阅、修改、追加、取消。

3、采用   可调无隙齿轮，切口啮合，运行平稳，精度高，噪音小。

4、切纸长度：400mm-9999mm,高机械速度：220m/min。

Full automatic high speed computer (straight) spiral knife cutting machine features:

1, using straight or spiral knife cutting mode, double roller rotary shear and difference. Two sets of knife roller up and down series configuration, can produce two kinds of different length of cardboard.

2, interface separation, color display production information, you can access at any time, modify, append, cancel.

3, the use of precision adjustable no gap gear, to ensure accurate meshing meshing, smooth operation, high precision, low noise.

4, cutting length: 400mm-9999mm, maximum mechanical speed: 220m/min.

全自动高速电脑螺横切机的技术指标：

1、横切精度：±0.5mm。

2、横切长度：400-10000mm。

3、横切速度：120、150、180、200米/分。

4、横切宽度：1400、1600、1800、2000、2200毫米。

5、横切速度：80-150米/分。

Full automatic high speed computer (straight) spiral knife cutting machine technical indicators:

1, cross cutting accuracy: + 0.5mm.

2, cross cutting length: 400-10000mm.

3, cross cutting speed: 120, 150, 180, 200 m / min.

4, cross cutting width: 1400, 1600, 1800, 2000, 2200 mm.

5, straight transverse speed: 80-150 M / min.