包装印刷产业网

登录

通用设备其它泵类

德国巴赫 进口高压角式截止阀德国高压角式截止阀

供应商:
上海凡而阀门有限公司
企业类型:
代理商

产品简介

进口高压角式截止阀

德国巴赫进口高压角式截止阀概述:
进口高压角式截止阀的启闭件是塞形的阀瓣,密封面呈平面或锥面,阀瓣沿流体的中心线作直线运动。高压角式截止阀又称角阀,阀杆的运动形式,有升降杆式(阀杆升降,手轮不升降),也有升降旋转杆式(手轮与阀杆一起旋转升降,螺母设在阀体上)。只适用于全开和全关,不允许作调节和节流。截止阀属于强制密封式阀门,所以在阀门关闭时,必须向阀瓣施加压力,以强制截止阀的

详细信息

进口高压角式截止阀

 

德国巴赫进口高压角式截止阀概述:

进口高压角式截止阀的启闭件是塞形的阀瓣,密封面呈平面或锥面,阀瓣沿流体的中心线作直线运动。高压角式截止阀又称角阀,阀杆的运动形式,有升降杆式(阀杆升降,手轮不升降),也有升降旋转杆式(手轮与阀杆一起旋转升降,螺母设在阀体上)。只适用于全开和全关,不允许作调节和节流。截止阀属于强制密封式阀门,所以在阀门关闭时,必须向阀瓣施加压力,以强制截止阀的密封面不泄漏。当介质由阀瓣下方进入阀门时,操作力所需克服的阻力,是阀杆和填料的摩擦力与由介质的压力所产生的推力,关“高压角式截止阀” 的力比开“高压角式截止阀”的力大,所以阀杆的直径要大,否则会发生阀杆顶弯的故障。

Inlet high angle stop valve

Overview of high pressure angle stop valve imported from Germany Bach:

Imported high-pressure angle type valve opening and closing parts are plug shaped valve, sealing surface flat or cone, fluid along the centerline of the valve for linear motion. The high-pressure angle type valve and angle valve stem form of exercise, a lifting rod (rod lifting, lifting wheel), but also lift rotating rod (hand wheel and rotate with the stem nut lifting, located in the body). Only applicable to fully open and fully closed, does not allow for adjustment and throttle. Valve is a mandatory seal valve, so the valve is closed, the valve must be applied to force the valve sealing surface does not leak. When the medium into the valve from the bottom of the valve, the operating force required to overcome the resistance, is the stem and the packing friction and pressure generated by the media thrust, "high pressure angle type valve" than "high-pressure angle type stop valve force, so the diameter of the valve stem, otherwise it will bend the stem top of the fault.


进口高压角式截止阀的定义:   

进口高压角式截止阀是一种进口和出口呈90°C夹角的截止阀,这种阀门除了具备一般法兰截止阀的优点和使用要求外,zui大的特点就是方便安装在管道系统的拐角处,既节省了90°C的弯头,又方便开闭操作。高压角式截止阀在化肥厂的合成氨系统和制冷系统中等到非常广泛的应用。

The definition of imported high-pressure angle type valve:

Imported high-pressure angle type valve is a valve in the import and export of 90 DEG C angle, in addition to this valve has the advantages of general flange valve and operation requirements, the biggest feature is easy to install in the corner of the pipeline system, not only saves the elbow 90 degrees C, and convenient opening and closing operation. High angle stop valve in the chemical fertilizer plant ammonia system and refrigeration system until a very wide range of applications.

 

 

 

 

 

 

 

进口高压角式截止阀技术参数

产品名称 

驱动方式

连接形式

结构形式

密封结构

压力范围

公称通径

常用材质

产品型号

 

 

进口高压角式截止阀

 

 

手动

 

 

法兰 

 

阀瓣非平衡式 

 

 

硬密封 

 

 

16.0-32.0MPaA

 

 

DN6-1250

 

 

铸钢、不锈钢

 

 

bach-a 

阀门尺寸标准

 

阀门试验标准

 

阀门交货标准

 

工业阀门标准

 

法兰阀门标准

 

焊接阀门标准

 

对夹式连接阀

 

内螺纹连接阀

 

可以提供美国

DIN EN558-2005

 

DIN EN12266-1-2003

 

DIN3230-2-1974

 

DIN EN 1171-2003

 

DIN EN 3202-1977

 

DIN EN 3202-1982

 

DIN EN 3202-1979

 

DIN EN 3202-1977

 

API、ANSI等标准

 

进口高压角式截止阀guan网:http://www.twvalve。。net/html/3456.html