包装印刷产业网

进口卧式端吸离心单级泵

进口卧式端吸离心单级泵概述：

水泵采用为单级单吸离心泵，轴向进水，经向出水，泵壳地步与底座固定。整体式泵轴，采用油脂润胡的导向深沟球轴承。泵与电机之间采用半弹性联轴器相连。标准型密封为长寿面、耐磨机械密封。

特点：

1采用后拉式结构，维修时无须拆除泵壳及管路。
2、所有泵型采用4种泵轴，*地提高了零件的互换性，且轴采用火焰校直，消除轴内部应力，提高了轴封的寿命。
3、所有叶轮均经过二次切削，已满足客户的实际需要。
4、叶轮前后均有耐磨口环，方便水泵的维护，提高了泵壳和叶轮的寿命，对长时间维持水泵的高效率提供了保证。
5、可选配易拆卸联轴器，方便客户在不移动电机的情况下，对水泵进行维护。

进口卧式端吸离心单级泵适用范围：
供水、供热、空调系统、增压供水、消防喷淋系统、喷洒、灌溉、游泳池、喷泉供水等、过滤净水系统

进口卧式端离心单级泵技术参数：

流量：2～1450m3/h  扬程：5～135m  口径：15～500mm   

功率：0.55kw～160kw  系统zui高工作压力：≤1.6MPa          
介质温度：-15℃～+105℃   环境温度：T≤40

电机防护等级：IP54或IP44
电机绝缘等级：B级或F级

进口卧式端离心单级泵美国泰乐TYLER售后服务：

用户*，信誉*，优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证，我公司服务质量管理体系的宗旨是：建立并不断完善科学、合理、高效的服务质量管理体系，公正、准确、及时地完成客户的售后服务质量保障工作，为我公司的客户服务建立良好、全面、充分的服务体系。

Horizontal centrifugal pump

Introduction of imported horizontal end suction centrifugal single stage pump:

Water pump is a single-stage single suction centrifugal pump, axial water, through the water, the pump shell and the base fixed. The pump shaft, the guide of deep groove ball bearing grease Yun hu. The pump is connected with the motor by semi elastic coupling. Standard seal for long life, wear-resistant mechanical seal.

Imported horizontal end suction centrifugal single-stage pump features:

1 after the pull structure, maintenance without dismantling the pump casing and pipeline.

2, all the pump using 4 kinds of pump shaft, greatly improves the interchangeability of parts, and the flame straightening shaft, shaft to eliminate internal stress and improve the life of shaft seal.

3, all impeller after two cutting, has to meet the actual needs of customers.

4, before and after the impeller wear ring, convenient maintenance of water pump, improve the pump casing and impeller life, for a long time to maintain the high efficiency of the pump provides a guarantee.

5, optional and easy to disassemble coupling, convenient for customers in the case of not moving the motor, the water pump maintenance.

Imported horizontal end suction centrifugal single-stage pump applicable scope:

Water supply, heating, air conditioning system, pressurized water supply, fire sprinkler system, spray, irrigation, swimming pool, fountain water supply, filtration water purification system

Technical parameters of imported centrifugal pump with horizontal end:

Flow rate: 2 ~ 1450m3/h head: 5 ~ 135m diameter: 15 ~ 500mm

Power: 0.55kw ~ 160kW system maximum working pressure: 1.6MPa

Medium temperature: -15 to +105 DEG C temperature: T = 40

Motor protection level: IP54 or IP44

Motor insulation grade: class B or class F

The imported Horizontal single-stage pump centrifugal end America TYLER Taylor customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.