包装印刷产业网

进口化工离心泵美国化工离心泵

进口化工离心泵参数:

流量：6.3～400m3/h；
扬程：5～132m；
转速：2900、1450r/min；
功率：0.55～110KW；
进口直径：50～200mm；
zui高工作压力：1.6Mpa。

进口化工离心泵工作原理:

化工离心泵除了叶轮的作用之外，螺旋形泵壳起的作用也是很重要的。从叶轮里获得了能量的液体流出叶轮时具有较大的功能，这些液体在螺旋形泵壳内被收集起来，并在后面的扩散管里把动能变成压力能。

化工离心泵与其他种类的泵相比，它具有构造简单、不易磨损、运行平稳、噪音小、出水均匀、调节方便、效率高等优点，因此化工离心泵得到了广泛的应用。

进口化工离心泵安装说明:

装时管路重量不应加在水泵上，应有各自的支承体，以免使变形影响运行性能和寿命。

2. 泵与电机是整体结构，安装时无需找正，所以安装时十分方便。

3. 安装时必须拧紧地脚螺栓，以免起动时振动对泵性能的影响。

4. 安装水泵前应仔细检查泵流道内有无影响水泵运行的硬质物（如石块、铁粒等），以免水泵运行时损坏叶轮和泵体。

5. 为了维修方便和使用安全，在泵的进出口管路上各安装一只调节阀及在泵出口附近安装一只压力表，以保证在额定扬程和流量范围内运行，确保泵正常运行，增长水泵的使用寿命。

6. 泵用于吸程场合，应装有底阀，并且进口管路不应有过多弯道，同时不得有漏水，漏气现象。

7. 排出管路如逆止阀应装在闸阀的外面。

8. 安装后拨动泵轴，叶轮应有摩擦声或卡死现象，否则应将泵拆开检查原因。

9. 泵的安装方式分为硬性联接和柔性联接安装。

进口化工离心泵维护以及保养:

1. 水管路必须高度密封。

2. 禁止泵在汽蚀状态下*运行。

3. 禁止泵在流量运行时，电机超电流*运行。

4. 定时检查泵运行时，电机超电流*运行。

5. 泵在运行过程中应有专人看管，以免发生意外。

6. 泵每运行500小时应对轴承进行加油。电机功率大于11KW配有加油装置，可用高压油枪直接注入，以保证轴承润滑优良。

7. 泵进行*运行后，由于机械磨损，使机组噪声及振动增大时，应停车检查，必要时可更换易损零件及轴承，机组大修期一般为一年。

进口化工离心泵美国泰乐TYLER售后服务：

用户*，信誉*，优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证，我公司服务质量管理体系的宗旨是：建立并不断完善科学、合理、高效的服务质量管理体系，公正、准确、及时地完成客户的售后服务质量保障工作，为我公司的客户服务建立良好、全面、充分的服务体系。

Chemical centrifugal pump

Imported chemical centrifugal pump parameters:

Flow: 6.3 ~ 400m3/h;

Head: 5 ~ 132m;

Speed: 2900, 1450r/min;

Power: 0.55 ~ 110KW;

Inlet diameter: 50 ~ 200mm;

Maximum working pressure: 1.6Mpa.

Working principle of centrifugal pump:

Chemical centrifugal pump in addition to the role of the impeller, the role of spiral pump shell is also very important. From the impeller to obtain the energy of the liquid flow out of the impeller has a larger function, these liquids are collected in the spiral pump shell, and in the back of the diffusion tube into kinetic energy into pressure.

Compared with other kinds of chemical centrifugal pump pump, it has the advantages of simple structure, easy to wear, smooth operation, low noise, uniform, convenient adjustment and high efficiency, so the chemical centrifugal pump has been widely used.

Chemical centrifugal pump installation instructions:

The weight of the pipeline should not be added to the pump, should have their own support body, so as not to affect the deformation performance and life.

2 pump and motor is the overall structure, no need to find the correct installation, so very convenient installation.

3 installation of anchor bolts must be tightened to avoid starting when the vibration on the pump performance.

4 before installing the pump should carefully check whether there is any influence on the pump pump running hard objects (such as stones, iron particles, etc.), in order to avoid damage to the impeller pump and pump body.

5 for easy maintenance and safe use, the installation of a control valve and a pressure gauge installed in the pump outlet near the pump inlet and outlet pipe, to ensure operation at rated lift and flow range, to ensure the normal operation of pumps, increase the service life of the pump.

6 pump for suction occasions, should be equipped with bottom valve and inlet pipe should not be too many corners, and shall not have Water Leakage leakage phenomenon.

7 discharge pipe such as check valve should be installed outside the gate.

After the installation of 8 toggle pump shaft, impeller due to friction sound or death card, otherwise the pump should be opened to check the reason.

9 pump installation method is divided into rigid connection and flexible connection installation.

Chemical centrifugal pump maintenance and maintenance:

1 water pipes must be highly sealed.

2 prohibit the long-term operation of the pump cavitation.

3 prohibit the pump running in the flow, motor over current operation for a long time.

4 check the operation of the pump, the motor current over a long period of time.

5 pumps in the course of operation should be someone to guard against accidents.

6 pump run every 500 hours to deal with bearing oil. The motor power is greater than 11KW with a refueling device, use the high pressure oil is injected directly into the gun, in order to ensure good bearing lubrication.

7 long term operation of the pump, due to mechanical wear, so that the noise and vibration of the unit increases, should stop the inspection, if necessary, can replace the vulnerable parts and bearings, the unit overhaul period is generally one year.

The United States imports of chemical centrifugal pump Taylor TYLER customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.

进口化工离心泵guan网：http://www.twvalve。。ｎｅｔ/html/2256.html