包装印刷产业网

进口高压锅炉给水泵美国高压锅炉给水泵

进口高压锅炉给水泵结构说明：

高压锅炉给水泵为多级分段式，其吸入口位于进水段上，成水平方向，吐出口在水段上垂直向上，其扬程可根据使用需要而增减水泵级数。多级离心泵装配良好与否，对性能影响关系很大，尤其是各个叶轮的口出与导翼的进出中心，其中稍有偏差即将使水泵的流量减少，扬程降低效率差，故在检修装配时务必注意。高压锅炉给水泵主要零件有:进水段、中段、出水段、叶轮、导翼挡板、出水段导翼、轴、密封环、平衡环、轴套、尾盖及轴承体。进水段、中段、导叶挡板、出水段导翼、出水段及尾盖均为铸铁制成，共同形成泵的工作室。

工作原理：

高压锅炉给水泵实际上属于多级泵，锅炉给水泵工作原理相当于把几个叶轮组装在一根泵轴上串联起来工作，泵轴上叶轮的数量也就是属于表示几级离心泵，例如一个叶轮的扬程是10米那么泵轴上面加装5个叶轮相当于此时扬程可达50米，锅炉给水运行时，水由泵进口被吸入，然后依次由*个叶轮压入到一个叶轮，每经过一个叶轮，压力就会增加一倍，所以通畅被称为高压锅炉给水泵。

技术参数：

流量：350-2400m3/h
扬程：1700-3100m
进口口径：200-300mm
出口口径：150-250mm
NPSHFr：22-125m
效率：75-84%
转速：5150-6435r/min
功率：3200-21000kw
材质：铸钢、不锈钢

美国泰乐TYLER售后服务：

用户*，信誉*，优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证，我公司服务质量管理体系的宗旨是：建立并不断完善科学、合理、高效的服务质量管理体系，公正、准确、及时地完成客户的售后服务质量保障工作，为我公司的客户服务建立良好、全面、充分的服务体系。

High pressure boiler feed water pump

Description of inlet high-pressure boiler feed pump:

The high pressure boiler feed water pump is multistage segment type, its suction mouth is located on the water inlet section, it is in the horizontal direction, and the outlet is vertical upward on the water section. Multistage centrifugal pump assembly is good or not, a great impact on the performance, especially the export and import guide wing center, which will make a slight deviation of pump head decreases flow reduction, poor efficiency, so be sure to pay attention in the maintenance assembly. The main parts of high pressure boiler feed water pump: water inlet section, the middle section of the water, the impeller and the guide vane damper, outlet section of guide vane shaft sealing ring and balancing ring and sleeve and a tail cover and the bearing body. The water inlet section, the middle section, the guide vane baffle plate, the water outlet section guide wing, the water outlet section and the tail cover are made of cast iron, which forms a pump working chamber.

Working principle of feed pump for imported high pressure boiler:

High pressure boiler feed pump actually belongs to the multi-stage pump, the working principle of boiler feedwater pump is equivalent to several impeller assembled in a pump shaft in series, the number of pump shaft impeller is belongs to the few stage centrifugal pump, such as an impeller head is 10 meters above the pump shaft so the installation of 5 impeller is equivalent to the head up to 50 meters, boiler operation, water from the pump inlet is inhaled, followed by the first impeller pressure into an impeller, with each impeller, pressure will be doubled, so smooth called high pressure boiler feed pump.

Technical parameters of high pressure boiler feed water pump:

Flow: 350-2400m3/h

Lift: 1700-3100m

Inlet diameter: 200-300mm

Outlet diameter: 150-250mm

NPSHFr:22-125m

Efficiency: 75-84%

Speed: 5150-6435r/min

Power: 3200-21000kw

Material: cast steel, stainless steel

The United States imports of high-pressure boiler feed pump TYLER Taylor customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.

GUAN网：http://www.twvalve。。ｎｅｔ/html/2249.html